With the TeamViewer IoT integration for IBHsoftec Edge Gateways, you instantly and securely remote connect to any of your PLCs – with zero complicated VPN setup, allowing easy access to controllers and their programming.
The newly developed gateway IBH Link IoT and pre-installed TeamViewer IoT Agent, the possibility is offered to access almost all PLC systems.
No PC required on site
Encrypted data ensures high security
Comfortable and simple configuration via web interface
S7 controllers addressable via S7 TCP/IP or IBH Link S7++
S5-controllers addressable via IBH Link S5++
Support of the SINUMERIK 840D/840D SL
Support of Mitsubishi controllers MELSEC IQR, FX5, QnA and L series
Support for Rockwell Controllogix and Compactlogix controllers
Support for Beckhoff TwinCAT controllers
For other PLC models please contact IBHsoftec
How to Setup
To activate Teamviewer Iot Agent on the device, please follow the steps below.
Configuration of the IP Addresses
The administration can be made with a recent web browser over the Ethernet port 1 by using the host name http://ibhlink-iot_<serial number> (f.i. http://ibhlink-iot_000161) or over the ports 2-4 by entering the default IP Address 192.168.1.14
On the PC the IBHNet-Iot Driver is required. The Driver is available from here
Default login is user admin with password admin.
Network: Management Level
Network configuration for Port 1 (Management level respectively Supervision Level)
Network: Control Level
Network configuration for Port 2 - 4 (Control Level respectively Machine Level)
TeamViewer Iot Configuratio
Login into the TeamViewer Iot Management Console click on your username in the right and from the dropdown menu select Assignment Token
Copy the Assignment Token and paste it the TeamViewer IoT menu on the device
Install and Configuring of IBH NET IoT driver
The required IBH Link IoT Driver is available here and needs to be installed on the pc from where you want to start the connection.
After installation, from system tray, click on the IBH Link IoT and select from the menu Agents
In the pop-up window, you need to configure the Display Name and the TeamViewer ID.
The Display Name can be freely chosen. The TeamViewer ID to be used for each device can be seen in the web interface of the edge device.
How to connect
Now, via the IBH Link IoT Tray the connection can now be established by selecting IBH Link IoT from menu.
After successful connection establishment, the IBH Link IoT appears as WireGuard tunnel in the Network Adapters.
From now on, all controls that are connected via the control level of the IBH Link IoT are accessible via TeamViewer.
Note: For the two Edge Gateways IBH Link UA and IBH Link UA Quad Core please contact IBHsoftec for the latest firmware update. This firmware update will have the TeamViewer IoT Agent preinstalled. Once the latest Firmware update is installed, please follow the instructions in the link “Manual TeamViewer IoT” from here