The Bosch XDK 110 Sensor Kit is a freely programmable sensor which provides eight different measurements. For the TeamViewer IoT Starter Kit it is programmed to send all to the TeamViewer IoT agent which then are visible and usable in the TeamViewer IoT Solution.
See Attached Files to download the full documentation.
Safety approvals
Main components
- Bluetooth 4.0 low energy IEEE 802.15.1Wireless LAN IEEE 802.11b/g/n
- 32-Bit microcontroller (ARM Cortex M3), 1MB Flash, 128 kB RAM
- Internal Li-Ion rechargeable battery 560 mAh
- Integrated antennas
- Built-in sensors: accelerometer, acoustic sensor, digital light sensor, gyroscope, humidity sensor, magnetometer, pressure sensor, temperature sensor
Operating conditions (indoor use)
The battery lifetime of the sensor is up to 24 hours depending on environmental conditions like temperature.
Measurement ranges
Sampling rate
Led indicators
The sensor has 4 LEDs on the top side. Each LED indicates a different status.
Troubleshoot
The LED patterns indicate problems with the sensor. Heed the table below and take action.
Attached files