This procedure is helpful when you need the IP address of your Edge Device / IoT Agent.
What you will need
Make sure that you have prepared the following points:
Get the IP address
📌Note: Write the IP address down.
- Access the edge device remotely (Access the Edge Device via Remote Terminal).
- In the terminal type in the following command and press return.
ifconfig
The IP address is displayed in the section eth0. For example inet addr:192.168.1.128
:
eth0 Link encap:Ethernet HWaddr 00:0F:20:CF:8B:42
inet addr:192.168.1.128 Bcast: Mask:255.255.255.192
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:2472694671 errors:1 dropped:0 overruns:0 frame:0
TX packets:44641779 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000