-
Installation
This section describes the step-by-step installation via the TeamViewer Embedded Management Console. System Requirements Install the Embedded Agent on a Device For information on installing the TeamViewer Embedded Solution on designated hardware see Installation on designated Hardware.
-
System requirements
The TeamViewer Embedded solution has been verified to be compatible with the following platforms / operating systems. TeamViewer Embedded agent TeamViewer Embedded cloud – Browser compatibility TeamViewer Embedded client for remote access TeamViewer Embedded Remote Access is currently available via TeamViewer Client v13.1…
-
Install the Embedded agent on a device
The TeamViewer Embedded Agent is needed to enable remote access to devices via internet. Installing it is a prerequisite to all remote access and monitoring processes. 1. To log in to the Embedded Management Console, open https://iot.teamviewer.com/ and use your TeamViewer account credentials. 2. From the left menu…
-
Easy installation on raspberry devices
The section describes the installation of the TeamViewer Embedded Solution on an empty Raspberry (without an operating system). What you will need Make sure that you have prepared the following points: A Raspberry (see System Requirements) connected to the keyboard and the monitor. A properly formatted micro SD card…
-
Set up a Yocto image for Raspberry
The Yocto Project enables the creation of custom Linux-based systems for embedded devices. The TeamViewer Embedded Agent will run on Yocto Linux devices given minimum requirements and configurations are met. This article is an example of how to build Yocto Image with TeamViewer Embedded Agent for Raspberry using the layer…