This article applies to all users with Business (purchased/subscribed to after October 30th, 2017), Premium or Corporate licenses.
Note: If you want to activate your Business license in TeamViewer 11 or 12 or you subscribed to TeamViewer prior to October 30th 2017, please have a look at this article: Activate Business license (legacy)
To activate the three possible devices for your Business license (valid only for TeamViewer 14), please follow these steps:
Note: If you create a new account, make sure to validate your new TeamViewer account. For this, you will receive a confirmation email from us with an activation link.
Note: The license is not activated on the device itself, but it is connected to your TeamViewer account. Please keep in mind: You have to be signed in to your TeamViewer Account to have licensed connections.
There are 2 ways in order to confirm if your device has been activated properly.
Under the Licence tab, If a device is assigned to your TeamViewer account, the device/computer name is shown. Otherwise, you will only see the TeamViewer ID.
Either way, if you can see the device information here, which means your Device has been activated.
You can use TeamViewer on up to three (3) devices to connect to remote devices (connect from one device at a time). If you already have 3 devices registered, a pop-up will appear in the TeamViewer application directing you to deactivate (remove) one of the existing devices from your license.
You can click the option 'Replace existing device' to be directed to the Management Console. Alternatively, you can manually log in to the Management Console here.
If you would like to replace one of the devices you are connecting from – for example, because of hardware replacement or an 'Install Limit Reached' alert - please see the following instructions.
You can use TeamViewer on unlimited devices to connect to remote devices (the number of concurrent sessions depends on the number of channels belonging to your license).