@vpa_axisYes, that's intended. One can not do device assigment of the device which is in shared group of which you are not the owner.
tnx for your IoT-Modul.
When i installed it a few weeks ago on a DS218 plus, it ran smoothly.
Now i installed it on a DS1817 plus, i could not log in. Even the previously problem-free running DS218 plus did not allow login anymore. Teamviewer Version is 13.2.14327.
Can you help please? The Message is shown in the picture.
Thank you very much!
Could you please tell us your windows version as we are not able to reproduce it?
Hello All TeamViewer Users,
Today, new TeamViewer package has been released for Synology. This package includes:
Yes, now you can access Synology terminal via TeamViewer. In order to use this feature, you require minimum TeamViewer 13.2 version.
Please download and update your Synology's TeamViewer package.
WIndows Version is Windows 7 Ultimate, all MS patches installed, German.
With the new version I can log in again (on DS1817 plus, DS218 plus I test tomorrow). However, Remote Terminal Mode does not work. He hangs when logging in like the old version.
Well, because I am so again, so "thank you".
DS218 plus tested - both login methods work!
If now access from the Galaxy S7 works, I would be happy :-)
Good to know that it works.
Could you elaborate "Remote Terminal Mode does not work"? What exactly is problem/not working?
Hi @arpitjindaltnx for your quick response.
>>What exactly is problem/not working?
Please look again at my picture in one of the last posts. The login attempt looks exactly like this. After the message "processing is running, please wait ..." nothing happens (even after several minutes).
Login without "Remote Terminal Mode" works as expected.
If it helps them and is technically possible, you could use a TeamViewer session to look at one of my computers and from there look at the login to Synology itself. However, that will be the day after tomorrow at the earliest. Then you could see what happens or not ...
Greetings from Berlin
I purchased a Buffalo TeraStation and a Q-NAP NAS in the last year. I would have gone with Synology had I known this was in the works.
Are there any other device or brand names we should be looking at? Other hardware types?
I'm looking at 48 port POE switches. Should I wait a little while?:smileywink:
At the moment, there are no other devices, in the pipeline, to support.
If we get enough request for the support of any other device then maybe we will add support in next year.
I should have been a lucky guy, I could easily install the package on my DS414, and thought that this was a good opportunity to use my new TeamViewer business subscription for accessing my NAS.
But I must have been an unlucky guy because TeamViewer said that my subscription (270-280 EUR / yr) was not eligible to access my new mobile (!) device, and additional package (240-250 EUR / yr) schould cover this demand.
Is my NAS acually a mobile device?
Thanks for the information. I will check it on my side and will let you know by the end of the week or next week. It should be accessible from every subscription.
Could you tell me which TeamViewer windows version are you using?
Did you find out something about the licensing requirements of the NAS access?
Yes. We have found the problem and trying to fix it at the moment. Unfortunately, you have to wait for some time. I will update you when its being done.
Can you kindly take me through the steps for Wake on Wide Area Network. I want to wake machines remotely
Actually I'm a bit far from this solution. Actually I have installed the client on my NAS and my actual subcription license prevents me from accessing the device. As far as I'm aware, TW is working on the solution to provide access, the wake-on LAN problem comes then.
As I said earlier, we have identified as why you are facing the problem with your subscription license. We are working on it.
I didn't get whats with "Wake-On-LAN" problem you are facing. Just for the information, we don't support Wake-On LAN in IoT at the moment.
I installed the package on my DS412+. I got it running, but my ID and password remain empty. Any suggestions? Am I doing something wrong here?
I have added the Synology into the list by "Add remote computer", but when i make it to "assign to account", it prompt the window as this picture,
[The URL link has been removed by a moderator according to the community guidlines]
But i have signed in my teamviewer account, the ID and the assigned password,
Now I'm using the teamviewer with the version 13.2.14327
Unfortunately, hyperlinks are automatically removed, can you upload the screenshot to your post, so we can see the error message prompted?
You have to enter the password shown in the Synology's TeamViewer GUI in the prompted password box.
Access the Synology device and open TeamViewer app. In that, it will display the TeamViewer ID and password. Copy the password or take a note of the password and enter it in the prompted displayed box.
any update by when the solution will be available for MAC OS X and Android, so that we can use it to connect to DSM ?
Unfortunately, TeamViewer 14 will not support this feature on macOS or Android. We have it on our roadmap, but I cannot give a definitive date, yet.
It seems that. although on Intel Celeron J3455, DS 918+ is not yet supported by any spk's I've found here. Will there be a release available for this chipset?
Thx, this works! AMD was the only package I did not try as I assumed it would not work since AMD and Intel are competitors.... ;-)..!