Community

Indeed, there are different behaviors between @exactll's return and mine, because I am always the same non-response. My login submission problem is the same on TV13 and TV14. Here are the Debian packages I tried with have the same behavior: - teamviewer_13.2.2.13582_amd64.deb - teamviewer_13.2.2.26559_amd64.deb - teamviewer_14.0.8346_amd64.deb As well as any intermediate versions, obtained following updates with apt. Clicking or pressing the enter key, once or several times, does not govern the interface. In the logs (/var/log/teamviewer14/TeamViewer14_Logfile.log), when I press the "log in" button, I have this: 2018/10/26 12:48:50.105 12231 **Please do not post TeamViewer IDs**16800 S SecureNetworkConnection:: SendCallbackHandler(): [ remoteID: 25 connection: **Please do not post TeamViewer IDs** remoteConnection: 0 ], Error: RCommand (Timeout) 2018/10/26 12:48:50.105 12231 **Please do not post TeamViewer IDs**16800 S SecureNetworkConnection:: SendCallbackHandler(): [ remoteID: 25 connection: **Please do not post TeamViewer IDs** remoteConnection: 0 ] Resetting connection due to error RCommand (Timeout) 2018/10/26 12:48:50.105 12231 **Please do not post TeamViewer IDs**16800 S RetryHandle:: HandleRetry(): Trying resend to 25 failed with error SecureNetworkTransport:4, retrying (2 retries remaining) BCmd: CC=66 CT=1 2018/10/26 12:49:02.110 12231 **Please do not post TeamViewer IDs**94912 S SecureNetworkConnection:: SendCallbackHandler(): [ remoteID: 25 connection: **Please do not post TeamViewer IDs** remoteConnection: 0 ], Error: RCommand (Timeout) 2018/10/26 12:49:02.110 12231 **Please do not post TeamViewer IDs**94912 S SecureNetworkConnection:: SendCallbackHandler(): [ remoteID: 25 connection: **Please do not post TeamViewer IDs** remoteConnection: 0 ] Resetting connection due to error RCommand (Timeout) 2018/10/26 12:49:02.110 12231 **Please do not post TeamViewer IDs**94912 S RetryHandle:: HandleRetry(): Trying resend to 25 failed with error SecureNetworkTransport:4, retrying (1 retries remaining) BCmd: CC=66 CT=1 If I type the command 'teamviewer setup' in the log, I have this:     2018/10/26 13:03:14.064 18891 **Please do not post TeamViewer IDs**06592 CT Logger started. 2018/10/26 13:03:14.065 18891 **Please do not post TeamViewer IDs**06592 CT Found 0 core dump files ... 2018/10/26 13:03:14.067 18891 **Please do not post TeamViewer IDs**06592 CT systemd: logind service available 2018/10/26 13:03:14.070 18891 **Please do not post TeamViewer IDs**06592 CT systemd: New seat seat0 [path=/org/freedesktop/login1/seat/seat0, activeSession='', canGraphical=0, canTTY=0, canMultiSession=0] 2018/10/26 13:03:14.072 18891 **Please do not post TeamViewer IDs**06592 CT LogindSessionInfo: New session LogindSessionInfo [id=3 user=kosnik state=user active=1 reliable=1 infoId=**Please do not post TeamViewer IDs**] [path=/org/freedesktop/login1/session/_33 TTY=??? seat= display= vtnr=**Please do not post TeamViewer IDs** owner=[SysUser: kosnik [uid=1000, gid=1000 home=/home/kosnik gecos=kosnik,,, shell=/bin/bash]] idle=0(0) active=1 type=tty class=user state=active timestamp=**Please do not post TeamViewer IDs**886478 service=su defaultCG= leader=1666 audit=3 remote=0 rHost= rUser=root killProc=0] 2018/10/26 13:03:14.075 18891 **Please do not post TeamViewer IDs**06592 CT SysSessionInfoManager: observing sessions from logind is marked as reliable 2018/10/26 13:03:14.076 18891 **Please do not post TeamViewer IDs**06592 CT SysSessionInfoManager: Session Information provided by VT [priority: 2] 2018/10/26 13:03:14.076 18891 **Please do not post TeamViewer IDs**06592 CT! FrameBuffer: Cannot access /dev/fb0, frame buffer support unavailable 2018/10/26 13:03:14.078 18891 **Please do not post TeamViewer IDs**06592 CT SysSessionInfoManager: own session cache set to '**Please do not post TeamViewer IDs**' 2018/10/26 13:03:14.085 18891 **Please do not post TeamViewer IDs**06592 CT!! ResourceLoader: loaded file '/opt/teamviewer/tv_bin/resources/TVResource_fr.so' version (8346) is not matching with application version (14.0.8346), Errorcode=11 2018/10/26 13:03:14.086 18891 **Please do not post TeamViewer IDs**06592 CT InterProcessBase:: SecureNetwork created 2018/10/26 13:03:14.089 18891 **Please do not post TeamViewer IDs**06592 CT AutoLogin:: Login: enabled: 1 2018/10/26 13:03:14.089 18891 **Please do not post TeamViewer IDs**06592 CT AccountLoginStateMachine::Reset 2018/10/26 13:03:14.089 18891 **Please do not post TeamViewer IDs**85376 CT InterProcessBase:: StartTcpCommunicationInternal(): setting m_NetworkConnector to new TCP connector 2018/10/26 13:03:14.089 18891 **Please do not post TeamViewer IDs**85376 CT Opening local TCP connection to 127.0.0.1:5939 2018/10/26 13:03:14.089 18891 **Please do not post TeamViewer IDs**03104 CT Local TCP connection established 2018/10/26 13:03:14.090 12231 **Please do not post TeamViewer IDs**09696 S CAcceptServer:: HandleAccept: new connection from 127.0.0.1:53420 2018/10/26 13:03:14.131 12231 **Please do not post TeamViewer IDs**16800 S+ IpcInitConnection:: Received_Control_InitIPC: Connecting process: 18891 2018/10/26 13:03:14.132 12231 **Please do not post TeamViewer IDs**16800 S+ RemoteSettingsAdministration: Receive signal new process [Type = 1048576] is online 2018/10/26 13:03:14.132 12231 **Please do not post TeamViewer IDs**16800 S+ RemoteSettingsAdministration:: TriggerSynchronisationOfAllRemoteableMachineSettings ProcessType: [1048576] SessionId: [**Please do not post TeamViewer IDs**] 2018/10/26 13:03:14.133 12231 **Please do not post TeamViewer IDs**16800 S+ RemoteSettings: MachineSettings:: SynchroniseAllRemoteableMachineSettings() 2018/10/26 13:03:14.179 18891 **Please do not post TeamViewer IDs**10400 CT SettingsIPCReception receive a SYNCHRONISE Settings command : UserSettings 2018/10/26 13:03:14.179 12231 **Please do not post TeamViewer IDs**95104 S+ IpcInitConnection:: Received_Control_InitIPC: Send InitIPC_Response to process: 18891 2018/10/26 13:03:14.179 18891 **Please do not post TeamViewer IDs**95808 CT Received Control_InitIPC_Response processtype=1 2018/10/26 13:03:14.179 18891 **Please do not post TeamViewer IDs**95808 CT Received Control_InitIPC_Response runningProcesses=1048577 2018/10/26 13:03:14.180 18891 **Please do not post TeamViewer IDs**95808 CT Control_InitIPC_Response: all processes 1048577 completely initialized 2018/10/26 13:03:14.180 12231 **Please do not post TeamViewer IDs**87616 S+ ConfigurationControllerImpl:: TriggerRequest(): Sending out request for session **Please do not post TeamViewer IDs** with features {9} 2018/10/26 13:03:14.180 18891 **Please do not post TeamViewer IDs**95808 CT+ ConfigurationHub::HandleRegistrationResponse(): feature 9 registered successfully 2018/10/26 13:03:14.180 12231 **Please do not post TeamViewer IDs**95104 S+ ConfigurationControllerImpl:: TriggerRequest(): Not ready for requests, state is 2 2018/10/26 13:03:14.180 12231 **Please do not post TeamViewer IDs**94912 S+ ConfigurationControllerImpl:: TriggerRequest(): Not ready for requests, state is 2 2018/10/26 13:03:14.180 18891 **Please do not post TeamViewer IDs**13536 CT+ ConfigurationHub:: HandleRegistrationResponse(): feature 5 registered successfully 2018/10/26 13:03:14.180 18891 **Please do not post TeamViewer IDs**13536 CT+ ConfigurationHub:: HandleRegistrationResponse(): feature 6 registered successfully 2018/10/26 13:03:14.180 12231 **Please do not post TeamViewer IDs**95104 S UpdateOnlineState alwaysOnline=0 modifiedOnline=0 otherProcess=1 restart=0 2018/10/26 13:03:14.180 12231 **Please do not post TeamViewer IDs**95104 S+ tvnetwork:: Online: online state 1 2018/10/26 13:03:14.223 18891 **Please do not post TeamViewer IDs**50016 CT+ ConfigurationHub:: HandleRegistrationResponse(): feature 5 registered successfully 2018/10/26 13:03:14.223 18891 **Please do not post TeamViewer IDs**50016 CT+ ConfigurationHub:: HandleRegistrationResponse(): feature 6 registered successfully 2018/10/26 13:03:14.223 18891 **Please do not post TeamViewer IDs**50016 CT+ ConfigurationHub:: HandleRegistrationResponse(): feature 9 registered successfully 2018/10/26 13:03:14.223 18891 **Please do not post TeamViewer IDs**50016 CT+ SecureNetwork:: RegisterBCommandCallback(): CC: 61, RegistrationID: 6e3c1823-77e6-4513-9f47-b1b9cd04acf9 2018/10/26 13:03:14.223 18891 **Please do not post TeamViewer IDs**50016 CT InterProcessBase:: SecureNetworkCallbackHandle created (RegistrationID: 6e3c1823-77e6-4513-9f47-b1b9cd04acf9) 2018/10/26 13:03:14.223 18891 **Please do not post TeamViewer IDs**19392 CT Account:: UpdateState: KA = 1, active = 1 2018/10/26 13:03:14.224 18891 **Please do not post TeamViewer IDs**06592 CT Account:: SetLoginState: new state: 2 2018/10/26 13:03:14.224 12231 **Please do not post TeamViewer IDs**09504 S SecureNetworkIPCAdapter:: RegisterSharedBCmdCallback(): CC: 61, RegistrationID: 6e3c1823-77e6-4513-9f47-b1b9cd04acf9, DyngateID: **Please do not post TeamViewer IDs**, ProcessType: 1048576, SessionID: **Please do not post TeamViewer IDs** 2018/10/26 13:03:14.224 18891 **Please do not post TeamViewer IDs**50016 CT!! InterProcessBase:: ProcessControlCommand Command 39 not handled, Errorcode=11 2018/10/26 13:03:14.273 12231 **Please do not post TeamViewer IDs**31392 S+ ConfigurationControllerImpl:: ProcessConfigurationResponse(): configuration for session **Please do not post TeamViewer IDs** contains 1 features 2018/10/26 13:03:14.273 12231 **Please do not post TeamViewer IDs**31392 S+ ConfigurationControllerImpl:: ParseReceivedConfigurations(): configuration for session **Please do not post TeamViewer IDs**, feature 9, contains 3 settings 2018/10/26 13:03:14.273 12231 **Please do not post TeamViewer IDs**31392 S+ ConfigurationControllerImpl:: HandleConfiguration(): Ready for next request 2018/10/26 13:03:14.273 12231 **Please do not post TeamViewer IDs**31392 S+ ConfigurationControllerImpl:: TriggerRequest(): Sending out request for session **Please do not post TeamViewer IDs** with features {5,6} 2018/10/26 13:03:14.366 12231 **Please do not post TeamViewer IDs**02400 S+ ConfigurationControllerImpl:: ProcessConfigurationResponse(): configuration for session **Please do not post TeamViewer IDs** contains 2 features 2018/10/26 13:03:14.366 12231 **Please do not post TeamViewer IDs**02400 S+ ConfigurationControllerImpl:: ParseReceivedConfigurations(): configuration for session **Please do not post TeamViewer IDs**, feature 5, contains 2 settings 2018/10/26 13:03:14.367 12231 **Please do not post TeamViewer IDs**02400 S+ ConfigurationControllerImpl:: ParseReceivedConfigurations(): configuration for session **Please do not post TeamViewer IDs**, feature 6, contains 1 settings 2018/10/26 13:03:14.367 12231 **Please do not post TeamViewer IDs**02400 S+ ConfigurationControllerImpl:: HandleConfiguration(): Ready for next request 2018/10/26 13:03:14.367 12231 **Please do not post TeamViewer IDs**02400 S+ ConfigurationControllerImpl:: TriggerRequest(): No more requests in queue 2018/10/26 13:03:54.062 18891 **Please do not post TeamViewer IDs**06592 CT Account:: SetLoginState: new state: 3 2018/10/26 13:03:54.062 18891 **Please do not post TeamViewer IDs**95808 CT Account:: UpdateState: KA = 1, active = 1 2018/10/26 13:03:54.062 18891 **Please do not post TeamViewer IDs**06592 CT Account:: SetLoginState: new state: 2 2018/10/26 13:03:54.062 18891 **Please do not post TeamViewer IDs**95808 CT AccountLogin:: Start: Trying account authentication 2018/10/26 13:03:54.069 12231 **Please do not post TeamViewer IDs**87616 S CSendCommandToMaster:: SendBCommandToMaster: CC=3 CT=4 2018/10/26 13:04:24.062 18891 **Please do not post TeamViewer IDs**06592 CT Configuration: Shutdown initiated 2018/10/26 13:04:24.063 18891 **Please do not post TeamViewer IDs**06592 CT Configuration: Wizard shut down 2018/10/26 13:04:24.063 12231 **Please do not post TeamViewer IDs**94912 S InterProcessNetwork: Received DisconnectIPC from processID 18891 (ProcessType: 1048576 in Session **Please do not post TeamViewer IDs**) with reason 2 2018/10/26 13:04:24.063 12231 **Please do not post TeamViewer IDs**94912 S+ ConfigurationIPCCommandHandler:: HandleProcessDisconnect(**Please do not post TeamViewer IDs**, 1048576) removing 3 registrations 2018/10/26 13:04:24.063 18891 **Please do not post TeamViewer IDs**57312 CT CTcpProcessConnector:: HandleRead(): Socket gracefully closed (PID=12231) 2018/10/26 13:04:24.063 18891 **Please do not post TeamViewer IDs**57312 CT CTcpProcessConnector:: CloseConnection(): PID=12231 2018/10/26 13:04:24.063 18891 **Please do not post TeamViewer IDs**57312 CT InterProcessBase:: EventFunctionInternal(): IPC-Connection Closed 2018/10/26 13:04:24.063 18891 **Please do not post TeamViewer IDs**57312 CT CTcpProcessConnector:: CloseConnection(): PID=12231 2018/10/26 13:04:24.063 18891 **Please do not post TeamViewer IDs**57312 CT CTcpProcessConnector:: CloseConnection(): Shutdown socket returned error 107: Transport endpoint is not connected 2018/10/26 13:04:24.063 12231 **Please do not post TeamViewer IDs**09504 S CTcpProcessConnector:: HandleRead(): Socket gracefully closed (PID=18891) 2018/10/26 13:04:24.064 12231 **Please do not post TeamViewer IDs**09504 S CTcpProcessConnector:: CloseConnection(): PID=18891 2018/10/26 13:04:24.064 12231 **Please do not post TeamViewer IDs**09504 S InterProcessNetwork:: ProcessDisconnected(): ConnectionClosed session=**Please do not post TeamViewer IDs** ptype=1048576 2018/10/26 13:04:24.064 12231 **Please do not post TeamViewer IDs**09504 S CTcpProcessConnector:: CloseConnection(): Shutdown socket returned error 107: Transport endpoint is not connected 2018/10/26 13:04:24.069 18891 **Please do not post TeamViewer IDs**20832 CT!! AccountLogin:: OnTimeout: no master response 2018/10/26 13:04:24.069 18891 **Please do not post TeamViewer IDs**20832 CT! MainThreadCall:: Post: The instance is already gone. 2018/10/26 13:04:24.069 18891 **Please do not post TeamViewer IDs**20832 CT! MainThreadCall:: Post: The instance is already gone. 2018/10/26 13:04:24.069 18891 **Please do not post TeamViewer IDs**20832 CT! MainThreadCall:: Post: The instance is already gone. 2018/10/26 13:04:24.070 18891 **Please do not post TeamViewer IDs**32288 CT+ FBSessionObserver: thread_interrupted 2018/10/26 13:04:24.072 18891 **Please do not post TeamViewer IDs**06592 CT Shutting down System DBus If necessary, I can provide other log   ... View more

@DanielStmthank for your help # teamviewer daemon stop systemctl stop teamviewerd.service # teamviewer psJe suis actuellement en version 14.0.8346, si besoin je peut réinstaller une version 13. root 7413 0.0 0.0 131720 4088 pts/5 S+ 18:00 Je suis actuellement en version 14.0.8346, si besoin je peut réinstaller une version 13. 0:00 /bin/bash /usr/bin/teamviewer ps # teamviewer daemon start systemctl start teamviewerd.service # teamviewer ps root 8549 0.1 0.0 1873380 9780 ? Sl 18:02 0:00 /opt/teamviewer/tv_bin/teamviewerd -d root 8803 0.0 0.0 131720 4152 pts/5 S+ 18:03 0:00 /bin/bash /usr/bin/teamviewer ps $ teamviewerJe suis actuellement en version 14.0.8346, si besoin je peut réinstaller une version 13. Init... CheckCPU: SSE2 support: yes Checking setup... Launching TeamViewer ... Launching TeamViewer GUI ... Then I go to the "Login" tab, I fill in the email and password fields, the "Login" button is blue, but if I click on it nothing happens. I am currently in version 14.0.8346, if necessary I can reinstall version 13.     ... View more

Hello, From what I understood, with my level of English not terrible, it's the same problem, but, maybe I'm wrong. I tried to uninstall TV13 and then install it again, I tried to install TV14, I tried to stop the daemon, and restart it. And it didn't solve my problem. I think for now I'm going to do without connecting with the TV GUI. ... View more

Htanks jsamr. I installed the libnss-mdns package, but it didn't solve the problem. It seems I forgot 1 lines in the log, so see the new console output : 2018/09/10 17:46:13.441 11959 140195302520576 GT!! SSOAuthentication: :IsSSOActive(): Unable to determine if SSO is active! Error was: SecureNetworkTransport:4, Errorcode=11 2018/09/10 17:46:13.442 11959 140195302520576 GT!! AccountLoginStateMachine: :OnLoginStarted::IsSsoActive failed, Errorcode=11 2018/09/10 17:46:13.442 11959 140195302520576 GT!! AccountLoginStateMachine: :OnError::Trace: SetLoginState(1); SetLoginState(3); SetLoginName(); SetLoginState(4); SetLoginName(); SetLoginState(3); StartLogin(); SetLoginState(3); SetLoginName(); SetLoginState(4); StartLogin(); SetLoginName(); SetLoginState(3); StartLogin(); SetLoginState(3); SetLoginName(); SetLoginState(4); StartLogin(); SetLoginName(); SetLoginState(3); StartLogin(); SetLoginName(); SetLoginState(4); StartLogin(); SetLoginState(3); SetLoginState(3); SetLoginName(); SetLoginState(4); StartLogin(); SetLoginName(); SetLoginState(3); StartLogin(); SetLoginName(); SetLoginState(4); StartLogin(); SetLoginState(3); SetLoginName(); SetLoginState(4); StartLogin(); SetLoginName(); SetLoginState(3); StartLogin(); SetLoginState(3); SetLoginName(); SetLoginState(4); StartLogin(); SetLoginState(3); SetLoginState(3); SetLoginName(); SetLoginState(4); StartLogin(); SetLoginState(3); SetLoginName(); SetLoginState(4); StartLogin(); SetLoginName(); SetLoginState(3); StartLogin(); SetLoginName(); SetLoginState(4); StartLogin(); SetLoginName(); SetLoginState(3); StartLogin(); SetLoginName(); SetLoginState(4); StartLogin(); SetLoginName(); SetLoginState(3); StartLogin(); SetLoginState(3); SetLoginState(3); SetLoginState(3); SetLoginName(); SetLoginState(4); StartLogin(); , Errorcode=11 I tried with a password in alphanumeric, to check if there was a problem with the special characters, and it didn't change anything. ... View more

Hello, I have the same problem, I just installed teamviewer 13, on debian stretch, I can open teamviewer, and connect to a remote host. When I click on the "login" button in the GUI, nothing happens, I can't identify myself. In log file, I have : 2018/09/09 01:15:52.927 8007 140702851701760 GT!! AccountLoginStateMachine::SetLoginName: unexpected state, Errorcode=11 2018/09/09 01:15:52.927 8007 140702851701760 GT!! AccountLoginStateMachine::OnError::Trace: SetLoginState(1); SetLoginState(3); SetLoginName(); SetLoginState(4); SetLoginState(3); SetLoginName(); SetLoginState(4); SetLoginState(3); SetLoginName(); SetLoginState(4); SetLoginName(); SetLoginState(3); StartLogin(); SetLoginName(); SetLoginState(4); StartLogin(); SetLoginName(); SetLoginState(3); StartLogin(); SetLoginName(); SetLoginState(4); StartLogin(); SetLoginState(3); SetLoginState(3); SetLoginState(3); SetLoginName(); SetLoginState(4); StartLogin(); SetLoginName(); SetLoginState(3); StartLogin(); SetLoginState(3); SetLoginName(); SetLoginState(4); StartLogin(); SetLoginName(); SetLoginState(3); StartLogin(); SetLoginName(); SetLoginState(4); StartLogin(); SetLoginName(); , Errorcode=11 And on the console in root, when I do "teamviewer setup", when I validate the password step, I get an error: "There was a connectivity problem. Please check your Internet connection and try again." Would the two problems be related to ? ... View more

Hello, I have the same problem, I just installed teamviewer 13.2.13582, on debian stretch. I can open teamviewer, and connect to a remote host. When I click on the "login" button in the GUI, nothing happens, I can't log in. In log file, I have : 2018/09/09 01:00:12.885 8007 140702851701760 GT!! AccountLoginStateMachine : : SetLoginName: unexpected state, Errorcode=11 2018/09/09 01:00:12.885 8007 140702851701760 GT!! AccountLoginStateMachine : : OnError::Trace: SetLoginState(1); SetLoginState(3); SetLoginName(); SetLoginState(4); SetLoginState(3); SetLoginName(); SetLoginState(4); SetLoginState(3); SetLoginName(); SetLoginState(4); SetLoginName(); SetLoginState(3); StartLogin(); SetLoginName(); SetLoginState(4); StartLogin(); SetLoginName(); SetLoginState(3); StartLogin(); SetLoginName(); SetLoginState(4); StartLogin(); SetLoginState(3); SetLoginState(3); SetLoginState(3); SetLoginName(); SetLoginState(4); StartLogin(); SetLoginName(); , Errorcode=11   And in root, when I do "teamviewer setup", when I validate the password step, I get an error: "There was a connectivity problem. Please check your Internet connection and try again."  Would the 2 problems be related to ? ... View more