Community

mLipok

I have a problem with pasting screenshot. When I copy Screenshot from remote host and trying to paste to my local desktop then all is fine. but... Trying to paste screenshot from my local desktop to remote host .... nothing happend. What is wrong ? REMARKS: on both sides (remote/local) I have recent TV verision.

mLipok

As it is a display error, it will not affect the session overall. Thanks for your answer, and informationa about work in progress. I know this is only display error but very distracting, especially when you login to 3 or 4 host at the same time, and you have opened many other window, then you must click and close each "Access Control Details" for clean up your desktop.

mLipok

For each connection I get this following window: Feature Request: 1. please add option to Turn ON/OFF showing this window 2. please make them above current opened session to user have easy option to click close 3. please add support for ESCAPE butto to close this window 4. please add auto hiding this window after 10 seconds

mLipok · ‎07 Dec 2018,

I confirm as NOT FIXED.

mLipok · ‎03 Dec 2018,

go to option / advance Check option called "Ignore alpha chanell on this computer" try to enable/disable on both remote/local computer. Question: Which combination fix your issue ?

mLipok · ‎14 Nov 2018,

Any plans about: When new documentatin will be published ? As TV14 is estabilized I wondering again.

mLipok · ‎14 Nov 2018,

This following screenshot shows which links works (green box) and do not works (red box).

mLipok · ‎14 Nov 2018,

stepbystep .... wwwbywww https://www.teamviewer.com/en/integrations/ https://www.teamviewer.com/en/for-developers/ https://www.teamviewer.com/en/for-developers/teamviewer-api/ https://www.teamviewer.com/?page_id=42236 currently: 502 Bad Gateway nginx but few times this URL https://www.teamviewer.com/?page_id=42236 was redirected to: https://www.teamviewer.com/en/?page_id=42236 and then I get: Ooops... Error 404 We are sorry, but the page you are looking for does not exist. Please check entered address and try again or Going beyond your suggestion for different URL's, I was able to download: https://www.teamviewer.com/en/for-developers/teamviewer-api/#api-documentation-section http://download.teamviewer.com/integrate/TeamViewer_API_Documentation.pdf

mLipok · ‎13 Nov 2018,

I just wanted to download TVAPI 14 Documentation. And I get: Ooops... Error 404 We are sorry, but the page you are looking for does not exist. Please check entered address and try again or Could somebody confirm the same issue ?

mLipok · ‎08 Nov 2018,

Thanks for information. To be clear. I had problems today, before 09:00 CET (in the morning). The problem was that during the connection (which was not broken), TeamViewer APP disconnected from the servers and logged out the user, and more precisely: the TVAPP window lost the contact list, logged out of the application and jumped out before the active session, which happiness did not disconnect. After less than a minute, the application logged in again and downloaded the contact list.

mLipok · ‎07 Nov 2018,

I use TV14.0.8346 Beta at least two weeks. So I think that this mean that the problem is not fixed yet.

mLipok · ‎07 Nov 2018,

related: https://community.teamviewer.com/t5/TeamViewer-General/Comment-Windows-long-wait-time/m-p/47717/highlight/false#M23669

mLipok · ‎07 Nov 2018,

related: https://community.teamviewer.com/t5/TeamViewer-General/Long-time-waiting-for-quot-Comment-window-quot-after-connection/m-p/44202

mLipok · ‎07 Nov 2018,

here is example I wait about 25 seconds to comment window give me possibility to enter comment. What is going on ? Why I must wait so long ? At least 1 year ago there was not such problem - this window was fully opened in 3 seconds.

mLipok · ‎26 Oct 2018,

I was not talk about Managment Console. To be more specyfic let try it with: TeamViewer Protable for Windows In TVPortable I see all new features, but my employes do not have this freature In the followed screenshot (it comes from my TV PORTALBE >> ADMIN) I used RED and GREEN boxes to show what is NOT VISIBLE (lack of feature) and what is VISIBLE (feature is possible to use but did not take any effect because some features are NOT VISIBLE)

mLipok · ‎26 Oct 2018,

https://dl.tvcdn.de/integrate/TeamViewer_API_Documentation.pdf Current documentation for TVAPI is "Version 13.2.0" Any plans about: When new documentatin will be published ?

mLipok · ‎26 Oct 2018,

In my small organization we all have instaled TV14. On my TV account (admin) I see all " Custom Device Information " in Stanadard TV APP My employes do not see them . For the same reason " Advanced Device Grouping " not works for them.

mLipok · ‎23 Oct 2018,

Does API have releated feature ?

mLipok · ‎18 Oct 2018,

Return values  records – List of remote control connections  id – Report-ID  userid (optional) – ID of the user that was signed in on the origin device.  username (optional) – User name of the person who started the connection.  originid – TeamViewer ID of the origin device.  targetid – TeamViewer ID of the target device.  targetname (optional) – Device name of the target device.  start_date – Start date and time of the connection.  end_date – End date and time of the connection.  next_offset (optional) – ID of the last returned report in this response. Can be used as off-set_id in a follow-up request to get the next set of connection reports.

mLipok · ‎04 Oct 2018,

I can not login in TeamViewer standard APP to my account. On screenshots, this red/orange rounded fields are inactive. Could any body confirm the same issue ? How to fix this issue ?

mLipok · ‎04 Oct 2018,

The only one "hurry up" is yours own needs, so I be waiting here for next message from you.

mLipok · ‎04 Oct 2018,

please make better documentation to this issue. Could be as a one big PDF with StepByStep story :)

mLipok · ‎03 Oct 2018,

Did you try this: Btw. Which option you have currently selected for "Window" property in this combobox ?

mLipok · ‎03 Oct 2018,

And here we are. Do you see the relation beetwen WINDOWS DESKTOP SIZE and TEAMVIEWER WindowSize ?

mLipok · ‎03 Oct 2018,

@jgt1942 wrote: The following are my measurements (Width, Height in pixels. My wife's laptop 1892, 1101 My laptop 1599, 930 My son's laptop 1904, 1104 My brother's laptop 900, 728 I think this is related to Windows desktop size - could you answer to my question from my previous post.

mLipok · ‎01 Oct 2018,

Could you also provide screen resolutions for each laptop ?

mLipok · ‎28 Sep 2018,

@jgt1942 wrote: No matter what I did the window size seemed to be impacted by the PC I'm connecting to. Do you mean, that window size and coordinates (not resolution), on your local PC, is releated to settings on remote PC ?

mLipok · ‎20 Sep 2018,

I need to leave comments after each connection for GDPR reasons and for my accounting department. The problem is that very often I must wait even 1 minutes to Comment Window appears. My system specyfication is: PC with Win10Pro + Intel i7 + SSD + 30Mbit Upload + 30Mbit Download Internet fiber optic connection Could somebody confirm the same problem ?

mLipok · ‎20 Sep 2018,

Do you mean a situation of unattended access ? For example via email or sms ? Would you add support for SMSAPI ? or other SMS Service providers ? Or you plan to have your own SMS provider ?

mLipok · ‎20 Sep 2018,

very often I get message: There was an error while attempting to post your message. Try again in a few minutes. But no one element is highlighted. So I'm unable to find what is going on . Can somebody answer what is the problem ?

mLipok · ‎20 Sep 2018,

There should be posibility to turn on or both option.

mLipok · ‎20 Sep 2018,

You should edit property on device in contact list.

mLipok · ‎18 Sep 2018,

btw. you also should check CPU speed on your local machine and check Internet SPEED (Download, Upload, Ping) on both sides. Look also here: https://community.teamviewer.com/t5/forums/editpage/board-id/Feature_Requests/message-id/2667

mLipok · ‎18 Sep 2018,

Recently I create this idea: https://community.teamviewer.com/t5/Ideas/GFX-Card-acceleration-usage-tester/m-p/43931 Please make "TeamViewer Environment tester" I should be run on both side Remote and Local to check If Host/Remote and Supporter/Local station meet "TeamViewer technicall needs" I would like to see test for: "connection speed" via TeamViewer "tunel"=="Connection" "ping" via TeamViewer "tunel"=="Connection" Remote/Local CPU speed Remote/Local GFX acceleration speed (acceleration used by TeamViewer) Remote/Local "ping" to the "user choosen" host Remote/Local "download speed" to the "user choosen" URL == internet hosted file This will bring users possibility to check whether their work environment is sufficient. EDIT: This is in relation to this post: https://community.teamviewer.com/t5/TeamViewer-General/Recommended-CPU-amp-Ram-etc/m-p/43979

mLipok · ‎18 Sep 2018,

@james2018 wrote: Further deatils request: Q1- In wat way is the 25GB IMAP relevant to Team Viewer. Hope it's not a dumb **bleep** question. When ESET AV PROGRAMM is checking 25GB of DATA it is much longer than 1GB So having only 2cores instead 4cores makes system unresponsive in some cases. @james2018 wrote: Q2- Will the 665 graphic card suffce? The answer will be possible after implementing this IDEA: https://community.teamviewer.com/t5/Ideas/GFX-Card-acceleration-usage-tester/m-p/43931 @james2018 wrote: Q3- Does RAM help TeamViewer? Will 16GB v 8GB contribute directly to TV performance? (yes, I meant GB and not MB. lol) If you have 4GB + SQL Server + AV Software +X +Y Software, then extending 4>8>16 GB is very very good idea . If you have 8GB , and at least 1GB free memory, then extending 8>16 GB, only for TeamViewer speed it is unreasonable. Focus on CPU or GFX but if you think about your GFX ... again look here: https://community.teamviewer.com/t5/Ideas/GFX-Card-acceleration-usage-tester/m-p/43931

mLipok · ‎18 Sep 2018,

@james2018 wrote: Q1- When you refer to "25GB IMAP synchronizatio", do you mean to indicate the TeamViewer data transfer when using TW? this 25GB IMAP must be synchronized by ThunderBird with IMAP server, as this is 25GB then ESET AV Software monitoring each communication, and this is a long time period so when I login and try to check my email I must wait few minutes wait to synchronize, and endure the intense work of AV Software. @james2018 wrote: Q2- I'm looking at a MacBook, will the 665 graphic card and 2.3GHz be sufficient? I'm not MacBook user, so I can't say is it powerfull configuration. @james2018 wrote: Q3- What about RAM, will 16MB be better than 8MB for a scenario like the one you specified? 2.3GHz quad-core eighth-generation Intel Core i5 processor Turbo Boost up to 3.8GHz Intel Iris Plus Graphics 655 8GB of 2133MHz LPDDR3 memory 256GB of SSD storage The time when MB Ram was used passed away a 2 decade ago, so I assumed it was just a mistake and it was about GB. The specyfication looks preaty good

mLipok · ‎17 Sep 2018,

Please look also here: https://community.teamviewer.com/t5/Ideas/GFX-Card-acceleration-usage-tester/td-p/43931

mLipok · ‎17 Sep 2018,

Please provide some GFX Card acceleration guide and special tester, or just show us how to use external GFX terster to find out if TeamViewer will use this GFX Card, ...... and HOWTO . Guide how to check if a computer specyfication is enougth to have effective work with TeamViewer. I think internal tester will be the best solution, that any device (Windows, Android, iOS, Linux) will have the same testing procedure and comparable results.

mLipok · ‎17 Sep 2018,

"desktop wil run the heavy CPU stuff" For example , in my case, on such computer, problem will araise with ThunderBird (25GB IMAP synchronizatio) + ESET AV + 7Zip + GoogleChrome with 10 cards. So you should have i7 or at least i5 with 4 cores. It also depend how your GFX Card will accelerate TeamViewer.

mLipok · ‎14 Sep 2018,

"do you see a dark-grey banner saying successful?" >> Now I just check here https://community.teamviewer.com/t5/Knowledge-Base/Dashboard-in-connections-to-mobile-devices/ta-p/37296 Current status is: 0% helpful (0/1) Trying to click YES The MousePointer Icon is change from Arrow to Hand Clicking YES 50% helpful (1/2) Summary: So I think first link was already clicked by me a very long time ago ? I think in such cases Forum Engine (Lithium) should "PopUp" an information "You allready clicked YES"

mLipok · ‎14 Sep 2018,

@DomLan interesting. Can you say how you obtained this information ? (I mean technically how you fouund information about facebook and HTTP 403)

mLipok · ‎14 Sep 2018,

Thank you for answer.

mLipok · ‎14 Sep 2018,

I just read this article: https://community.teamviewer.com/t5/Knowledge-Base/Get-started-For-personal-usage/ta-p/33153#toc-hId--1188857196 and I wanted to click YES but I'm not able to do this on my Win10Pro64Bit+GoogleChrome. Can somebody confirm the same issue ?

mLipok · ‎14 Sep 2018,

Any comment ? Somebody have the same feeling ?

mLipok · ‎14 Sep 2018,

Any progress ?

mLipok · ‎07 Sep 2018,

releated: https://community.teamviewer.com/t5/Ideas/Quick-information-about-ID-and-Description-in-Contact-List/m-p/24740#M1940

mLipok · ‎07 Sep 2018,

I'm curious if anyone uses contact information. And how it is useful to him now. Because for me at present it is meaningless without direct viewing of this data (I mean immediately after selecting the contact, i.e. without having to click in the property). What are your experiences with this functionality?

mLipok · ‎06 Sep 2018,

@kosta wrote: C'mon... it's GUI only. I support your opinion but ... I've always wondered why developers have this problem with it. Ie. with small changes in the GUI. I have the same problem with many other applications created by many other companies. I always thought that every German product is a good product. However, I have known for a long time that the issue of software quality is globally the same. I do not mean that TeamViewer is bad, on the contrary it is good, but every product can be better.

mLipok · ‎05 Sep 2018,

Today In relation to this: https://community.teamviewer.com/t5/Community-help/Problem-with-openining-notification-list/m-p/43156#M402 I get two notyfication: Esther @mentioned you in Re: Problem with openining notification list Esther replied to topic Re: Problem with openining notification list QUESTION: Why I get 2 notyfication instead 1. The first would be enougth as when I see that somebody mention me then i do not want second notification in the same topic. Is it possible to change in some way this behavior ? EDIT: btw. notyfication about KUDOS and solving should be always separate notyfication.

mLipok · ‎05 Sep 2018,

I confirm as fixed

Badges