Community

jloswald

Watch out everyone. If you user Teamviewer from a hotel room to access your home pc (which I did) - Teamviewer will not claim that you are using it for commercial use and shut down your access to your "home pc" and will have their sales try to sale you on paying **Please Do Not Discuss Pricing** for the service. So much for their free service anymore. Make sure you have a backup plan to access your pc, just in case they do this to you as well. Also, when I spoke with the rep. about filling out a form to explain that I only use Teamviewer for personal use, I asked how long it would take to respond and the rep. stated it would take about 2 weeks. Guess you get what you pay for when you are using their free version.

mLipok

@MattiViljanen wrote: I also created my ideal comment dialog. Pardon the Finglish (: PS. "Nothing to comment" link is odd, I'd replace it with "Close" button. I dreamed about this thing last night.....

jmac999

What's confusing exactly? The logs have the recorded data/time and if the recording occurs direct to whatever storage is configured, they just link to the same location with their pre-defined filename for retreival. I thought of implementing my own setup utilising OneDrive but it was the OneDrive element I couldn't easily automate and even if it was setup correctly, there is little to ensure it remains compliant. Handling recordings from within the cloud platform would be a much cleaner way to ensure recordings are centralised and enforced rather than relying on the config of the end client which can so eaily fall out of compliance.

mLipok

Here: Updating to the latest and greatest version of TeamViewer. is description how to update. Ok, but: How to get list of outdated host ? I would like to get list of all host which have instaled TVHost and to which I gain EasyAccess. As I understand it would not be any security issue with that as I want a list only this hosts, which I have marked before as "EasyAccess". Anybody know the answer ?

mLipok

I hope somebody know the answer .... ?

LucVinckVTS

The Teamviewer User ID does not showup anymore in Teamviewer version 14. Thanks a lot! The simple option to retrieve the user ID does not show up anymore in version 14. See document https://dl.tvcdn.de/integrate/TeamViewer_API_Documentation.pdf Section 4.2.1: you need to do a GET /api/v1/users Why make things difficult when it was easy?

Mars30

reverse engineering -) I can't run next command: TV.RequestConnectTo(???, ID, Parol) where ??? is a connection mode

igor_cipi

tomdickson_apco

I am also wondering if there is any effort currently to add custom attributes to device information in the API?

mossback

Has this come to pass? Can I now have my tech use his own account to access a shared list of TV users in the intela.net portal? If he adds new TV nodes, they will show up in my TV portal?

mLipok

@AlphaSeb wrote: I agree, this feature is essentially useless. I would like to improve your statement. This functionality looks like an interesting feature for the future, but now it is useless because it can not be used in practice.

wclusa · ‎19 Jun 2019,

In my case, the Teamviewer 12 service (TeamViewer_service.exe) was hung and I couldn't restart it. I had to manually kill the service, then afterwards I could start it afresh, at which point I was able to access remote teamviewer PCs & laptops outside the local LAN. I have no doubt that an alternate solution for me would have been to simply reboot the affected laptop but reboots take longer than killing, then restarting a service. My problem started when I moved my laptop from a hard wire connection to wifi then back to hard wire - we do it all the time at work when taking our laptops to and from meetings. This is the first and only time I've encountered this particular issue.

greytuk · ‎18 Jun 2019,

Same request from us. We need to be able to enforce all users are using 2FA, and at least in the interim be able to view that end users have enabled this. It is crazy that this is not available in the Enterprise product...

YWelis · ‎12 Jun 2019,

Maybe a message saying why I'm suspected of using TV commercially. Deciding if I'm allowed 30 seconds of 5 minutes of a session (after 10 minutes).

JeanK · ‎07 Jun 2019,

Hello @Brastax, Thank you for your message. This is a very crucial question, indeed. In order to get the best support by our support engineers, please open a ticket via https://www.teamviewer.com/en/support/ We will be happy to answer all your question and to find the best settings for your use. We wish you a good weekend. Cheers Jean

jbmac05 · ‎03 Jun 2019,

As someone else suggested, opening a file or folder on the target Mac seems to get around the problem for me, at least between two Macs. Hope TeamViewer and Apple can get this issue resolved.

jmac999 · ‎23 May 2019,

Still nothing?

Yershov · ‎21 May 2019,

Same Problem Shame!

EmilV · ‎09 May 2019,

Well, yes, I have the latest, and activated the old UI. I meant the original post. "Please add configuration to turn On/Off the "Recent Contact" feature."

ramstranger · ‎08 May 2019,

Hello, Does this setting need to be set on local or remote machine, to have the desired effect? Thanks in advance for help!

mLipok · ‎08 May 2019,

How to prevent problem like in this following ScreenShot : EDIT my own quick translation: ESET: "Aplication was modified... Aplication (TeamViewer 13) on this computer was modified and now is trying to communicate over network .... save rules" TEAMVIEWER: "In this sesion capture of screen is not possible. Probably it is releated to user switch or end of connection/sesion in remote desktop"

xrkolovos · ‎08 May 2019,

We need this feature too. We need to add teamviewer in Linux Servers and open vpn.

tom1stein · ‎05 Apr 2019,

That looks like a headless pc (a pc without a monitor). You may use a vga/hvi/hdmi dummy connector for headless devices, which will fake a monitor and thus makes that monitors resolutions available. Costs less than 5$, Or you may look on sourceforge for a programm named QRES. Get the setup version, unzip the patches inside the zip inside the zip (!), copy qres.exe and qres.dll into the same directory, and start something like "qres x=1280 y=1024".

Clarence218 · ‎25 Mar 2019,

For OS Windows XP SP3, the supported versions of team veiwer are 3-14,as stated in https://community.teamviewer.com/t5/Knowledge-Base/Which-operating-systems-are-supported/ta-p/24141#toc-hId--**Please do not post TeamViewer IDs** So you are not answering the question!

mLipok · ‎15 Mar 2019,

thanks I will keep eye on this :)

mLipok · ‎15 Mar 2019,

thanks for info

RobertHiddink · ‎08 Mar 2019,

Same problem here with 100 computers in the field... Any solutions yet?

Alejors · ‎07 Mar 2019,

thanks!

mLipok · ‎28 Feb 2019,

I think this should be on ConnectionReports via TeamViewer API. But after a QuickReview I think it is not in ConnectionReports. This could be very handy if TeamViewerDevTeam will be able to add this feature to ConnectionReports.

mLipok · ‎25 Feb 2019,

@SimonShaw and @asgnmail I know what you mean... You know what? ................... ................... ................... I have the same problem with other bigger software developer .... Reading your posts, I think I have to sue Microsoft, because as in 2004 I bought a notebook with WindowsXP it was supposed to run all the time ...... and it still works, i.e. it can be run, but most websites do not work, especially banking. I wonder why ...... And yet my MS Office 2003 does not read files that I receive from my clients ... it is also not honest. I do not understand why I can not use all these new websites and all the new documents that I read from my clients. Because they (banks and my clients) have new versions and they support old standards ... I think so. Well, because I'm not stupid, and I think that they (banks and my clients) are not stupid, after all they know that I have old equipment and old software, so my bank and my clients will surely adapt to me. ... or .......... it's definitely Microsoft's fault ...... after all, my bank still uses the old formats, just like my clients ... because why should they use new ones? Yes definitely Microsoft's fault, because ...... It's not my fault that I use old standards, and I do not adapt to the security requirements of my bank and my clients. Definitely they should adapt to me after all. ................... ................... ...................

Fawn45 · ‎12 Feb 2019,

@dchbbc wrote: Can you explain that to dummies? I have no idea what this means or how to do it the questions myself too, no experiences? Psiphon

mLipok · ‎07 Feb 2019,

I have a problem with pasting screenshot. When I copy Screenshot from remote host and trying to paste to my local desktop then all is fine. but... Trying to paste screenshot from my local desktop to remote host .... nothing happend. What is wrong ? REMARKS: on both sides (remote/local) I have recent TV verision.

bobby_ward · ‎31 Jan 2019,

I too am having this problem . For personal use and it will disconnect after only 1 minute. Them tell distant end they cannot reconnect in 10 minutes. Wait the 10 Minutes and retry, then gets disconnected after 1 minute. Makes it incapable of completing anything

mLipok · ‎30 Jan 2019,

As it is a display error, it will not affect the session overall. Thanks for your answer, and informationa about work in progress. I know this is only display error but very distracting, especially when you login to 3 or 4 host at the same time, and you have opened many other window, then you must click and close each "Access Control Details" for clean up your desktop.

sadpandas · ‎24 Jan 2019,

Can we get full names in our remote tabs?

dbh · ‎10 Dec 2018,

It's interesting, that from my MacBook or iPhone I can access my PC, but from my PC - NO!

mLipok · ‎03 Dec 2018,

go to option / advance Check option called "Ignore alpha chanell on this computer" try to enable/disable on both remote/local computer. Question: Which combination fix your issue ?

DomLan · ‎03 Dec 2018,

Hi @mLipok, red signed link is a pointer to a specific section in current page (an href to #api-documentation-section). It is used to scroll focus just upper that button. After repositioning, what happens is an call to Facebook to keep track of your specific click. I imagine that for your structure the call to this social is forbidden during working hours ... as it should be! Regards

jasontlow · ‎28 Nov 2018,

This was my problem as well. I only had this problem connecting to my work computer from home. If I sign out of TeamViewer before I leave work I'm able to connect. Another workaround for me is if I forget to sign out. I can connect to another machine on the same network as my work computer. Then I use mstsc to connect to my computer. At that point I can connect with TeamViewer and disconnect mstsc.

MyCC-BrianG · ‎14 Nov 2018,

The one major difference between logging in through the 2-factor and Captcha, versus popping it open via the "Open Management Console" shortcut from TeamViewer client: The login timeout. If I log in manually, I can come back throughout the day and my session seems to remain open for MUCH longer without finding I've been timed out. If I use the shortcut from the client, the timeout is very short and I am constantly having to go open it again from the shortcut. The timeout is annoying enough that I've gone back to the Captcha nonsense because at least that is a once-daily annoyance vs many times a day having to sign back in from being timed out. Overall, I do not like this being forced upon us without configuration. I already set up 2-Factor authentication. I already added this device as a trusted device to my account. You can certainly store a cookie in my browser noting that I checked the box to "Keep me signed in". There is already multiple ways I have asked that you remember ME on THIS browser. The Captcha on top of ALL of that is NOT welcome. The Captcha should only be presented to NON-Trusted devices, when a cookie does not yet exist, when someone has not yet checked the "Keep me signed in" box.

Neelsb · ‎14 Nov 2018,

Hi, any news on this?

mLipok · ‎07 Nov 2018,

related: https://community.teamviewer.com/t5/TeamViewer-General/Comment-Windows-long-wait-time/m-p/47717/highlight/false#M23669

dyress_ai · ‎06 Nov 2018,

I fixed mine by going to the VPN Ethernet adapter and unchecking IPV6 (in both computers). After that, I can ping normally between any of the two computers within the VPN.

mLipok · ‎23 Oct 2018,

Does API have releated feature ?

hsi · ‎22 Oct 2018,

Hi I have the same issue, but Disabled Alpha channel does not help. We have business license. And TeamViewer13 is installed on host machine, the latest version.

Silver_2000 · ‎21 Oct 2018,

Like many licensed customers that pay WELL for the software, many of my connections were renumbered by Teamviewer after a breach of some kind on their end. So now when I look at my reports I see Unnamed devices. Its exceedingly difficult to BILL unnamed devices ... This is a HUGE fail for teamviewer. Ive submitted a support request, im curious what suggestions they will have

mLipok · ‎18 Oct 2018,

Return values  records – List of remote control connections  id – Report-ID  userid (optional) – ID of the user that was signed in on the origin device.  username (optional) – User name of the person who started the connection.  originid – TeamViewer ID of the origin device.  targetid – TeamViewer ID of the target device.  targetname (optional) – Device name of the target device.  start_date – Start date and time of the connection.  end_date – End date and time of the connection.  next_offset (optional) – ID of the last returned report in this response. Can be used as off-set_id in a follow-up request to get the next set of connection reports.

mLipok · ‎04 Oct 2018,

I can not login in TeamViewer standard APP to my account. On screenshots, this red/orange rounded fields are inactive. Could any body confirm the same issue ? How to fix this issue ?

mLipok · ‎04 Oct 2018,

The only one "hurry up" is yours own needs, so I be waiting here for next message from you.

mLipok · ‎20 Sep 2018,

Do you mean a situation of unattended access ? For example via email or sms ? Would you add support for SMSAPI ? or other SMS Service providers ? Or you plan to have your own SMS provider ?

Badges