centos 7 Launching TeamViewer GUI 无进一步反应

在CentOS 7 安装了 teamviewer, 服务也启动正常，但在命令行终端里输入teamviewer，启动仅显示如下几行，然后就没有进一步反应，并没有打开teamviewer图形界面。这是什么原因呢？

Init...
CheckCPU: SSE2 support: yes
Checking setup...
Launching TeamViewer ...
Launching TeamViewer GUI ...

安装的状态检测

systemctl status teamviewerd.service
● teamviewerd.service - TeamViewer remote control daemon
Loaded: loaded (/etc/systemd/system/teamviewerd.service; enabled; vendor preset: dis abled)
Active: active (running) since 一 2020-04-20 17:10:04 CST; 2h 50min ago
Process: 2262 ExecStart=/opt/teamviewer/tv_bin/teamviewerd -d (code=exited, status=0/ SUCCESS)
Main PID: 2320 (teamviewerd)
CGroup: /system.slice/teamviewerd.service
└─2320 /opt/teamviewer/tv_bin/teamviewerd -d

4月 20 17:10:04 localhost.localdomain systemd[1]: Starting TeamViewer remote contr....
4月 20 17:10:04 localhost.localdomain systemd[1]: PID file /var/run/teamviewerd.pi....
4月 20 17:10:04 localhost.localdomain systemd[1]: Started TeamViewer remote contro....
Hint: Some lines were ellipsized, use -l to show in full.

Find more posts tagged with

CAEpai

您好！服务配置文件（service config file）在什么路径之下？

Ying_Q

@CAEpai 您好，

感谢您的回复。

就了解了您遇到的问题和提供的信息后，从 TeamViewer Linux 工程师方面得到的反馈为：您遇到的情况有可能是初始化脚本和systemd 之间的PID路径混乱造成的。请您检查您的设备上的服务配置文件（service config file）。

十分抱歉，我们无法协助进行配置。多谢您的谅解。

Ying_Q

CAEpai

您好，多谢您的解答！

按照您的提示，卸载原来的版本，下载您给的链接上的新版本，安装以后仍然是一样的。

无论是从桌面应用菜单中的teamviewer点击，没有反应，还是通过命令终端输入teamviewer，同我之前描述的一样只出来那几行提示，并不弹出图形窗口。

CAEpai

您好，多谢您的答复！

我按照您提供的下载地址重新下载安装了。（安装前先卸载掉之前的版本）

安装完成后，结果与之前一样，无论是直接从应用→Internet→teamviewer用鼠标点击方式，还是直接在命令行终端中输入teamviewer，均没有什么更多的反应。

原本打算上传截图附在后边，供您参考分析。但图片无法添加近来，可去我的图片中查看。

@Ying_Q 已写:
@CAEpai 您好，
感谢您的回复。
TeamViewer 软件和操作系统版本的兼容性没有异常。
请您尝试将现有的TeamViewer版本卸载，然后再次进行下载和安装，同时确认该设备已连接到显示器。
Ying_Q

[------@localhost ~]$ teamviewer

Init...
CheckCPU: SSE2 support: yes
Checking setup...
Launching TeamViewer ...
Launching TeamViewer GUI ...
[------@localhost ~]$ teamviewer info

TeamViewer 15.4.4445 (RPM)

TeamViewer ID: ------（有数字，已略）

teamviewerd status ● teamviewerd.service - TeamViewer remote control daemon
Loaded: loaded (/etc/systemd/system/teamviewerd.service; enabled; vendor preset: disabled)
Active: active (running) since Tue 2020-04-21 15:42:32 CST; 3min 8s ago
Main PID: 29013 (teamviewerd)
CGroup: /system.slice/teamviewerd.service
└─29013 /opt/teamviewer/tv_bin/teamviewerd -d

Apr 21 15:42:32 localhost.localdomain systemd[1]: Starting TeamViewer remote control daemon...
Apr 21 15:42:32 localhost.localdomain systemd[1]: PID file /var/run/teamviewerd.pid not readable (yet?) after start.
Apr 21 15:42:32 localhost.localdomain systemd[1]: Started TeamViewer remote control daemon.

[------@localhost ~]$ teamviewer daemon status

systemctl status teamviewerd.service
● teamviewerd.service - TeamViewer remote control daemon
Loaded: loaded (/etc/systemd/system/teamviewerd.service; enabled; vendor preset: disabled)
Active: active (running) since Tue 2020-04-21 15:42:32 CST; 3min 29s ago
Main PID: 29013 (teamviewerd)
CGroup: /system.slice/teamviewerd.service
└─29013 /opt/teamviewer/tv_bin/teamviewerd -d

Apr 21 15:42:32 localhost.localdomain systemd[1]: Starting TeamViewer remote ...
Apr 21 15:42:32 localhost.localdomain systemd[1]: PID file /var/run/teamviewe...
Apr 21 15:42:32 localhost.localdomain systemd[1]: Started TeamViewer remote c...
Hint: Some lines were ellipsized, use -l to show in full.

Ying_Q

@CAEpai 您好，

感谢您的回复。

TeamViewer 软件和操作系统版本的兼容性没有异常。

请您尝试将现有的TeamViewer版本卸载，然后再次进行下载和安装，同时确认该设备已连接到显示器。

Ying_Q

CAEpai

采用本社区里的安装方法安装的：

# preparation: install epel-release
yum install epel-release

# download and install (example: TeamViewer Host, 64 bit)
wget https://download.teamviewer.com/download/linux/teamviewer-host.x86_64.rpm
yum install ./teamviewer-host*.rpm

查询后的版本信息：

TeamViewer 15.4.4445 (RPM)

TeamViewer ID: 省略（有号码）

teamviewerd status ● teamviewerd.service - TeamViewer remote control daemon
Loaded: loaded (/etc/systemd/system/teamviewerd.service; enabled; vendor preset: disabled)
Active: active (running) since Mon 2020-04-20 17:10:04 CST; 19h ago
Process: 2262 ExecStart=/opt/teamviewer/tv_bin/teamviewerd -d (code=exited, status=0/SUCCESS)
Main PID: 2320 (teamviewerd)
CGroup: /system.slice/teamviewerd.service
└─2320 /opt/teamviewer/tv_bin/teamviewerd -d

Apr 20 17:10:04 localhost.localdomain systemd[1]: Starting TeamViewer remote control daemon...
Apr 20 17:10:04 localhost.localdomain systemd[1]: PID file /var/run/teamviewerd.pid not readable (yet?) after start.
Apr 20 17:10:04 localhost.localdomain systemd[1]: Started TeamViewer remote control daemon.

Ying_Q

@CAEpai 您好，

多谢您的留言。

请问您安装的 TeamViewer 版本系数为什么版本？

Ying_Q