TeamViewer Host Raspberry Pi 3 does not start
So, I installed TeamViewer host for Raspberry Pi 2 / 3 on my RPi 3 this morning, but whenever I click it to start, nothing happens.
Really, I left it on for 10-15 minutes after clicking (multiple times), but nothing happened. Any idea why this could be?
Yours sincererly,
Sjouke
Best Answer
-
Dear DevCas1,
Thank you for your post.
To be able to diagnose your issue we need a little bit more information.
Is it possible to send us the output of the following commands?
cd /tmp
cat /proc/cpuinfo | grep Revision | tee info.log
cat /etc/os-release | tee -a info.log
cat /etc/*version | tee -a info.log
teamviewer info | tee -a info.log
cat /etc/systemd/system/display-manager.service | tee -a info.logThese commands will be output on your screen and the file located in /tmp/info.log
We are looking forward to your comments.
Have a great day!
Best Regards,
Christian
Did my reply answer your question? Accept it as a solution to help others, Thanks.6
Answers
-
Dear DevCas1,
Thank you for your post.
To be able to diagnose your issue we need a little bit more information.
Is it possible to send us the output of the following commands?
cd /tmp
cat /proc/cpuinfo | grep Revision | tee info.log
cat /etc/os-release | tee -a info.log
cat /etc/*version | tee -a info.log
teamviewer info | tee -a info.log
cat /etc/systemd/system/display-manager.service | tee -a info.logThese commands will be output on your screen and the file located in /tmp/info.log
We are looking forward to your comments.
Have a great day!
Best Regards,
Christian
Did my reply answer your question? Accept it as a solution to help others, Thanks.6 -
Dear Christian,
My apologies for not replying earlier, school and work have taken more of my time than I initially expected, and have not yet returned to work on my Raspberry...
Anyway, as answer to the following commands:
cd /temp $ cat /proc/cpuinfo | grep Revision | tee info.log =
"Revision : a02082"
cat /etc/os-release | tee -a info.log =
"PRETTY_NAME="Raspbian GNU/Linux 8 (Jessie)"
NAME="Raspbian GNU/Linux"
VERSION_ID="8"
ID=raspbian
ID_LIKE=debian
HOME_RL="http://www.raspbian.org/"
SUPPORT_UrL="http://www.raspbian.org/RaspbianForums"
BUG_REPORT_URL="http://www.raspbian.org/RaspbianBugs"cat /etc/(version | tee -a info.log =
8.0teamviewer info | tee -a info.log =
TEAMVIEWER 12.0.78433 (DEB)
TEAMVIEWER STATUS teamviewerd.service - TeamViewer remote
Control daemon
Loaded: loaded (/etc/systemd/system/teamviewerd.sercide: enabled)
Active: active (running) since Wed 2017-07-05 17:17:05 CEST: 3 weeks 5 days ago
Process: S36 ExecStart-/opt/teamviewer/tv_bin/teamviewerd -d (code-exited, status=0/SUCCESS)
Main PID: 626 (teamviewerd_
CGroup: /system.slice/teamviewerd.service
\>626 /opt/teamviewer/tv_bin/teamviewerd -d
TEAMVIEWER ID: 604263690cat /etc/systemd/system/display-manager.service | tee -a info.log =
[Unit]
description-Light Display Manager
Documentation-man: Lightdm(1)
After=systemd-user-sessions.service
[Service}
# temporary safety check until all DMs are converted to correct
# display-manager.service symlink handling
ExecStartPre-/bin/sh -c '[ "$(cat /etc/X11/default-display-manager 2>/dev/null)" = "/usr/sbin/lightdm" ]'
ExecStart=/user/sbin/lightdm
Restart-always
BusName=org.freedesktop.DisplayManagerHope all of this information helps out!
0 -
Hi there,
I have the same / a similar problem with my Pi 3.
I also tried to start it from the console:
pi@tobipi:~ $ teamviewer
Init...
CheckCPU: armv7l
Checking setup...
Launching TeamViewer ...
Launching TeamViewer GUI ...
pi@tobipi:~ $And then nothing happens...
For futher information:
pi@tobipi:~ $ teamviewer info
TeamViewer 13.0.4541 (DEB)
TeamViewer ID: [ID removed by moderator]
teamviewerd status ● teamviewerd.service - TeamViewer remote control daemon
Loaded: loaded (/etc/systemd/system/teamviewerd.service; enabled)
Active: active (running) since Die 2017-11-28 21:06:25 CET; 20min ago
Process: 2707 ExecStart=/opt/teamviewer/tv_bin/teamviewerd -d (code=exited, status=0/SUCCESS)
Main PID: 2709 (teamviewerd)
CGroup: /system.slice/teamviewerd.service
└─2709 /opt/teamviewer/tv_bin/teamviewerd -dHope somebody can help
0 -
I also have problems with the setup command:
pi@tobipi:~ $ teamviewer info
TeamViewer 13.0.4541 (DEB)
TeamViewer ID: 340555470
teamviewerd status ● teamviewerd.service - TeamViewer remote control daemon
Loaded: loaded (/etc/systemd/system/teamviewerd.service; enabled)
Active: active (running) since Die 2017-11-28 21:45:10 CET; 47s ago
Process: 4469 ExecStart=/opt/teamviewer/tv_bin/teamviewerd -d (code=exited, status=0/SUCCESS)
Main PID: 4471 (teamviewerd)
CGroup: /system.slice/teamviewerd.service
└─4471 /opt/teamviewer/tv_bin/teamviewerd -d
pi@tobipi:~ $ sudo teamviewer daemon status
systemctl status teamviewerd.service
● teamviewerd.service - TeamViewer remote control daemon
Loaded: loaded (/etc/systemd/system/teamviewerd.service; enabled)
Active: active (running) since Die 2017-11-28 21:45:10 CET; 54s ago
Process: 4469 ExecStart=/opt/teamviewer/tv_bin/teamviewerd -d (code=exited, status=0/SUCCESS)
Main PID: 4471 (teamviewerd)
CGroup: /system.slice/teamviewerd.service
└─4471 /opt/teamviewer/tv_bin/teamviewerd -d
Nov 28 21:45:10 tobipi systemd[1]: PID file /var/run/teamviewerd.pid not readable (yet?) after start.
Nov 28 21:45:10 tobipi systemd[1]: Started TeamViewer remote control daemon.
pi@tobipi:~ $ sudo teamviewer setup
TeamViewer daemon is not running, setup cannot continue. Please activate the TeamViewer daemon before invoking setup.
pi@tobipi:~ $0 -
Did you find solution for this?
If yes then please post the solution, I am currently facing this issue.
0 -
Sadly, I have been unable to try further to resolve the issue. The Raspberry Pi 3 I had was my education's Raspberry, and had it for a short time to play around with. Sorry
0 -
same problem here... any tip ?
0 -
Please, has anyone found the solution? I have the same problem.
0 -
So, someone said it had to do with multiple screens. I dont think so, because on your main screen you see the open programs. And TV is not open. The command (is that what it is called?) says what people are saying ("Launching Teamviewer GUI") but nothing happens. So, anyone at TV able to help? This post is years old, and still the same problem.
0 -
Hi. I had this issue. I found out that when I remote desktop connection to the raspberry pi 3 and try to open Teamviewer Host I have the same problem as you. But I found out that what in reality happens is that teamviewer opens on the main session, that is, the one that I can see if I plug in a monitor display to the RPI3 (I'm not really sure if I'm describing it well, but what remote desktop connection seems to do is open a new session) So try logging in to that main session and see what happens, it should work there. Hope this helps.
0
