Teamviewer for raspberry headless setup problem

Kezbar
Kezbar Posts: 1 ✭
in Linux only

Hello, i installed the teamviewer for raspberry on my raspberry pi 3 and it works great and all but i wanted to set up the headless mode via the console command 

          sudo teamviewer setup

and it gives me connectivity issues everytime i enter my email and password

how can i fix this issue?

Comments

  • ChristianCay
    ChristianCay Posts: 182 [Former Staff]

    Dear Kezbar,

    Thank you for your correspondence thus far.

    We got some news from our developers, and this is, unfortunately, a known problem in the current version. Our developers are already working on a solution, and the issue will soon be solved.

    We are sorry for the inconvenience.

    If you have any further questions, please feel free to contact us.

    Best Regards,

    Christian

    Did my reply answer your question? Accept it as a solution to help others, Thanks.
  • ChristianCay
    ChristianCay Posts: 182 [Former Staff]

    Dear Kezbar,

    The TeamViewer setup command helps you to add your device to your computers and contacts with EasyAccess. However, you may be able to use your system in headless mode by following this workaround.

    #get teamviewer id
    teamviewer info

    #set a password 
    sudo teamviewer passwd [password]

    After running those commands, you may add your device to your computers and contacts list.

    Hope that solution works for you.

    Best regards,

    Christian

     

    Did my reply answer your question? Accept it as a solution to help others, Thanks.
  • blacky
    blacky Posts: 1

    i have the same problem , working on a raspberry pi 3 only with ssh

    no monitor no keyboard attached to RASPI

    password is set and i know the ID

    Version of TV is TeamViewer                           12.0.78433 (deb)

    i could see the RASPi from Windwos, but if i connect i am getting "Authentification denied"

    both pc are on same private network

    i have reduced complexity of password , but it is not working

     

    2017/06/04 17:05:26.986  3240 1953494096 DX0!! GuiWindowCheckLin::CheckForValidGUIWindows: n(0) , m(0)  count 0, Errorcode=11
    2017/06/04 17:05:27.000  3240 1996013568 DX0!  XSM: No X Session Management for current session available (yet)
    2017/06/04 17:05:27.087  3240 1953494096 DX0!! GuiWindowCheckLin::CheckForValidGUIWindows: n(0) , m(0)  count 1, Errorcode=11
    2017/06/04 17:05:27.188  3240 1980757072 DX0!! GuiWindowCheckLin::CheckForValidGUIWindows: n(0) , m(0)  count 2
    2017/06/04 17:05:27.202  3240 1904211024 DX0   CLoginServer::CheckIfConnectionIsAllowed()
    2017/06/04 17:05:27.290  3240 1972368464 DX0!! GuiWindowCheckLin::CheckForValidGUIWindows: n(0) , m(0)  count 3
    2017/06/04 17:05:27.391  3240 1953494096 DX0!! GuiWindowCheckLin::CheckForValidGUIWindows: n(0) , m(0)  count 4, Errorcode=11
    2017/06/04 17:05:27.492  3240 1980757072 DX0!! GuiWindowCheckLin::CheckForValidGUIWindows: n(0) , m(0)  count 5
    2017/06/04 17:05:27.595  3240 1972368464 DX0!! GuiWindowCheckLin::CheckForValidGUIWindows: n(0) , m(0)  count 6
    2017/06/04 17:05:27.696  3240 1980757072 DX0!! GuiWindowCheckLin::CheckForValidGUIWindows: n(0) , m(0)  count 7
    2017/06/04 17:05:27.798  3240 1953494096 DX0!! GuiWindowCheckLin::CheckForValidGUIWindows: n(0) , m(0)  count 8, Errorcode=11
    2017/06/04 17:05:27.900  3240 1972368464 DX0!! GuiWindowCheckLin::CheckForValidGUIWindows: n(0) , m(0)  count 9
    2017/06/04 17:05:28.001  3240 1961882704 DX0!! GuiWindowCheckLin::CheckForValidGUIWindows: n(0) , m(0)  count 10, Errorcode=11
    2017/06/04 17:05:29.015  3240 1972368464 DX0!! GuiWindowCheckLin::CheckForValidGUIWindows: n(0) , m(0)  count 20
    2017/06/04 17:05:30.041  3240 1972368464 DX0!! GuiWindowCheckLin::CheckForValidGUIWindows: n(0) , m(0)  count 30
    2017/06/04 17:05:31.054  3240 1972368464 DX0!! GuiWindowCheckLin::CheckForValidGUIWindows: n(0) , m(0)  count 40
    2017/06/04 17:05:32.068  3240 1980757072 DX0!! GuiWindowCheckLin::CheckForValidGUIWindows: n(0) , m(0)  count 50, Errorcode=11
    2017/06/04 17:05:33.082  3240 1961882704 DX0!! GuiWindowCheckLin::CheckForValidGUIWindows: n(0) , m(0)  count 60, Errorcode=11
    2017/06/04 17:05:33.203  3240 1904211024 DX0!! CLoginServer::CheckIfConnectionIsAllowed: GUI check timed out or cancelled
    2017/06/04 17:05:33.203  3240 1904211024 DX0!! CLoginServer::CheckIfConnectionIsAllowed: Incoming connection from 101518111 denied, because TeamViewer is not visible

    do i have to accept licsence before ??

    Cu

    Chris

     

     

     

  • ChristianCay
    ChristianCay Posts: 182 [Former Staff]

    Dear Blacky,

    Thank you for your message.

    Yes, you need to accept the license agreement.

    To make sure you already accept use the following command

    grep -i eula /opt/teamviewer/config/global.conf

    To accept license agreement you may run the following command on a CLI session

    sudo teamviewer setup

    Hope this solution works for you.

     

    Best regards,

    Christian

    Did my reply answer your question? Accept it as a solution to help others, Thanks.
  • ISV-wolfy
    ISV-wolfy Posts: 1
    Okay. I've done every step. I pressed 'y' to EULA. Then TeamViewer prompted to enter e-mail/name, okay. Then - password. But when I've done - it was: sign in failed (unknown reason). What I am doing wrong?
  • Steve_92
    Steve_92 Posts: 2

    Hello,

    I've got the same problem with setup. It makes me mad !

    Did you find a solution ?

    Steve

  • Paul_DL
    Paul_DL Posts: 12 ✭✭

    I don't know if this helps you, but you can run TeamViewer headless with a dummy display adapter (cheap from Amazon, both HDMI and VGA offered). So it's without a display until you unplug the dummy and plug in the real display. No configuration changes needed.

    Search Google: Dummy Plug Virtual Display amazon vga hdmi

Trustpilot

Categories

This Week's Leaders