hoe do i set up unattended access so the host machine can be accessed from the client pc remotely without anyone being present at the host machine.
Hi @ProCarbon,
Welcome to the TeamViewer Community and thanks for your post!
The following article introduces the step-by-step procedure for unattended access settings. Could you please try the settings explained in the article and see how this goes?
📄Provide unattended remote support
Please feel free to this thread if you have any questions or difficulties during the unattended access setup.
Hope the Community article would be helpful.
Best,
Akiho
Hijacking this thread, sorry.
You guys have amazingly ignored two glaringly huge issues with this, that most people will have to deal with.
1 What happens when the remote computer is shut off, or put to sleep, and the dynamic IP address on that end changes?
2 Once 1 is dealt with, how does one set up wake-from-LAN, if they want to be able to put the remote computer to sleep between sessions, maintain the current IP address on the remote PC, and be able to wake it to use it remotely again?
These are deal breakers you utterly ignored in instructions. Nobody wants to leave a PC running 24/7, and hope the IP doesn't get interuppted, triggering a new IP address, which will make the remote PC invisible to the controlling PC!!!!
Please create instructions for people to be able to figure this out and do it!
