teamviewer.com link icon
or
Ask The Community

Permission to access yum repository denied

Guus013Guus013 Posts: 2
in Linux only

The yum repo, that still worked on January 15, 2018, now returns:

Permission to access 'http://linux.teamviewer.com/yum/stable/main/binary-x86_64/media.1/media' denied.

This is the repository as provided by installing 13.0.6634:

/etc/yum.repos.d/teamviewer.repo

Comments

  • AngelwindAngelwind Posts: 3

    I'm getting the same denied message when trying to update through Ubuntu.

  • WerwolfWerwolf Posts: 3 
    Permission to access 'http://linux.teamviewer.com/yum/stable/main/binary-x86_64/media.1/media' denied.


    what's wrong with that?

     

    System:    Host: wolfbook.itrus.su Kernel: 4.15.1-1-default x86_64 bits: 64 gcc: 7.3.0 Console: tty 0
               Distro: openSUSE Tumbleweed 20180208
    Machine:   Device: portable System: Dell product: Vostro 3460 serial: JM6G2W1
               Mobo: Dell model: 0J1V31 v: A00 serial: .JM6G2W1.CN486432CK0025. UEFI: Dell v: A19 date: 08/22/2013
    Battery    BAT0: charge: 18.5 Wh 100.0% condition: 18.5/48.8 Wh (38%) model: SIMPLO Dell status: Full
    CPU:       Dual core Intel Core i5-3210M (-HT-MCP-) arch: Ivy Bridge rev.9 cache: 3072 KB
               flags: (lm nx sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx) bmips: 9976
               clock speeds: max: 3100 MHz 1: 2561 MHz 2: 2987 MHz 3: 2848 MHz 4: 2686 MHz
    Graphics:  Card: Intel 3rd Gen Core processor Graphics Controller bus-ID: 00:02.0
               Display Server: X.org 1.19.6 drivers: intel (unloaded: modesetting,fbdev,vesa)
               tty size: 191x31 Advanced Data: N/A for root out of X
    Audio:     Card Intel 7 Series/C216 Family High Definition Audio Controller
               driver: snd_hda_intel bus-ID: 00:1b.0
               Sound: Advanced Linux Sound Architecture v: k4.15.1-1-default
    Network:   Card-1: Intel Wireless 7260 driver: iwlwifi bus-ID: 01:00.0
               IF: wlp1s0 state: up mac: fc:f8:ae:50:4a:06
               Card-2: Qualcomm Atheros AR8161 Gigabit Ethernet driver: alx port: 2000 bus-ID: 02:00.0
               IF: p4p1 state: down mac: 5c:f9:dd:55:b9:6f
    Drives:    HDD Total Size: 1080.2GB (54.8% used)
               ID-1: /dev/sda model: KINGSTON_SV300S3 size: 120.0GB temp: 42C
               ID-2: /dev/sdb model: SAMSUNG_MZ7LM960 size: 960.2GB temp: 0C
    Partition: ID-1: / size: 96G used: 31G (33%) fs: ext4 dev: /dev/sda2
               ID-2: /home size: 881G used: 509G (58%) fs: ext4 dev: /dev/sdb1
               ID-3: swap-1 size: 13.73GB used: 0.00GB (0%) fs: swap dev: /dev/sda3
    Sensors:   System Temperatures: cpu: 68.0C mobo: 70.0C
               Fan Speeds (in rpm): cpu: N/A
    Info:      Processes: 266 Uptime: 0:18 Memory: 3644.6/11868.6MB Init: systemd runlevel: 5 Gcc sys: 7.3.0
               Client: Shell (bash 4.4.181) inxi: 2.3.40
  • DanielStmDanielStm Posts: 224 Staff

    @Angelwind: I doubt that. Ubuntu does not have yum. Have a look here.

    @Werwolf: did you make any manual changes to the repository configuration? What does 'zypper repos' give you? (Or: which tools are you using?)

    @Guus013: Does the problem still exist? Which distribution are you on? Which commands do you use?

    Best regards,

    Daniel

    Linux Developer
  • WerwolfWerwolf Posts: 3
    No, I don't change repo
    Only create symlink
    ln -s /etc/yum.repos.d/twrepo /etc/zypper/repos.d/twrepo
  • DanielStmDanielStm Posts: 224 Staff

    'zypper repos' output? 'zypper refresh' output?

    Linux Developer
  • Guus013Guus013 Posts: 2

    @DanielStm: I just now added the repo again and it works fine!

    I am on openSUSE Leap 42.3 and had simply copied /etc/yum.repos.d/teamviewer.repo to /etc/zypp/repos.d/teamviewer.repo. I use the YaST Software Repositories and Software Management GUIs, which execute zypper commands and zypper read the original yum repo file:

    [teamviewer]
    name=TeamViewer - $basearch
    baseurl=http://linux.teamviewer.com/yum/stable/main/binary-$basearch/
    gpgkey=http://linux.teamviewer.com/pubkey/TeamViewer2017.asc
    gpgcheck=1
    enabled=1
    failovermethod=priority

    ... and updated it to this, I only enabled auto-refresh using the GUI:

    [teamviewer]
    name=TeamViewer - $basearch
    enabled=1
    autorefresh=1
    baseurl=http://linux.teamviewer.com/yum/stable/main/binary-$basearch/
    type=rpm-md
    gpgcheck=1
    gpgkey=http://linux.teamviewer.com/pubkey/TeamViewer2017.asc
    keeppackages=0
  • WerwolfWerwolf Posts: 3

    pastebin

  • marcos13marcos13 Posts: 1

    Same problem here. Command 'zypper refresh' fails!

    OS: OpenSuSE 42.3; x86_64

    /zypp/repos.d/teamviewer.repo

    foo:~ > cat /etc/zypp/repos.d/teamviewer.repo
    [teamviewer]
    name=TeamViewer - $basearch
    enabled=1
    autorefresh=1
    baseurl=http://linux.teamviewer.com/yum/stable/main/binary-$basearch/
    gpgkey=http://linux.teamviewer.com/pubkey/TeamViewer2017.asc
    gpgcheck=1
    type=rpm-md
    keeppackages=0

    Output of 'zypper refresh teamviewer'

    foo:~ # zypper refresh teamviewer
    Permission to access 'http://linux.teamviewer.com/yum/stable/main/binary-x86_64/media.1/media' denied.
    Abort, retry, ignore? [a/r/i/...? shows all options] (a):

    It seems that 'zypper' works slightly different to 'yum' and needs reading permission for some extra files or directories. E.g. Google has managed to set up a repository that functions with both, 'zypp' and 'yum'!!

    marcos

  • DanielStmDanielStm Posts: 224 Staff

    @Guus013, @Werwolf, @marcos13: we have released an update.
    Please have a look: [Update: 13.1.3026] Spring Update

    Please uninstall the current package and replace it with the dedicated SUSE package.

    Linux Developer
Sign In or Register to comment.

Howdy, Stranger!

It looks like you're new here. If you want to get involved, click one of these buttons!

Sign In

Support Forum