Download the new version and let us know what you think about it! 👉 Please click here 👈
I've been having issues trying to connect to my mother's Oppo phone since late August. We do manage to connect, but then it times out, within about 30 secs. It thinks I am running it commercially or whatever ?? But I am not ! I was then advised to try the reset management. I did this, but still having issues. When I applied for the reset management, I advised just my ID. Maybe that is the issue ? Should I have also advised of my mother's ID ??
In addition, should my mother load onto her phone , the Universal Add-on for Android ? Maybe that is another issue ?
OK, further to the above. I have just logged into the "Reset Management" section. And it does mention the application has been submitted and is "pending further review". Is there further information required ???
Several months ago I was using TeamViewer on a personal basis, to help my family and friends, but I was wrongly suspected of commercial use. So I had abandoned teamviewer, but a few days ago I saw on the site that there was a form to request an unblocking, so I filled it out and I am now awaiting a response. But given this bad experience, I would like to know, if for personal use there is a limited number of authorized id's (friends or family member) that one can log in non simultaneously to be able to help them.
I have started getting the following error when connecting to my PC remotely.
I am the only person connecting to this device as its a personal device.
Any idea why this is happening and how I can prevent it?
I can connect and about 30 seconds later I get disconnected with that error.
I have already run through the Reset Management side to try to get my free account unrevoked and re-enabled.
I use 2 clients in my TV account that are both only private use mining but I connect alot to adjust my GPU Power % and fans accordingly when we are both in and out of the house.
I logged the request on the Reset Management side about 1 week and a half ago but I've still had no email, response etc which is disappointing :(.
I know I'm not a paying customer but I'd at least thought I'd have had an email with various updates or to say it's being investigated still.
I've attempted to call the TV number but because it's a free license I'm just greeted with "Thanks for your support, goodbye" then the call ending.
Is there anyway of finding an update on this at all? It's associated with my account email.
I've been an user for a couple of years, not commercial, and keep getting kicked out for not having a commercial license, please help.
same thing is happening to me I hope someone can tell us why. I am just trying to help my 85 year old neighbor print a copy of her birth certificate and it keeps kicking me out.
This is the third time this has happened to me. I only use this software to help my family and girlfriend. I DO NOT USE TEAMVIEWER FOR COMMERCIAL PURPOSES!!!!!!!!!!!
Tonight my girlfriend calls and asks for help with her computer, so I connect and I'm kicked out after minute. Now she is stuck with a problem until I drive across town to help her.
This used to be a nice program, now it is the most unreliable software on the internet.
TEAMVIEWER, stop blocking innocent peoples access!!!!!!!! Whatever algorithm you are using is NOT WORKING right!!!!!!
What connection with the answer to my question.. 😒
I have used Team Viewer in the past with no problems. I have re instated the account. I am now in need to connect to my home computer from my work ( I am now driving truck) I am being notified the connection is being considered a commercial account. I have NOT been able to connect for more than 2 minutes. I can not get any answers as to why. I am not in a financial position to buy a subscription as I recently returned to work after Covid. Is the free version really free? and what can I do to make sure I can connect? Thank you for your tine.
I ran into this same issue last Monday. I submitted a free use reset request the same day. On Thursday, having heard absolutely nothing and seeing no change in the 'request pending review' message on the website, I decided to see if installing an old version of TV (v14) would make a difference. Installed v14 and tried connecting again (I have a pc and am connecting to a mac which still has the most up-to-date version). No change - still disconnected after a minute or so with same old error. Tried again Thursday evening - no change. Friday morning I tried again and it worked, and has continued working fine since (today being Sunday). I looked just now and there has been no change in the 'request pending review' message, but TV seems to be back to working. I have no idea what, if anything, I did to solve the issue, but I thought it was worth sharing. Let's hope it keeps working.
The same issue here. I use TeamViewer to help my parents maybe once a few months. I think its easy to check how freaquently I use the application...
Pleas read it - you have to fill a form and send it. I hope it will be solved in 2 business days... My mother will be angry :)
How can I get TV working properly without being disconnected ?
Just to add a note to this thread, the problem when I got flagged as 'commercial user' earlier in the year only got cleared when I gave them the IDs from every machine on my network that I connect to, not just the couple that were having difficulties.
Not sure if this advice will help anyone.
so true....same happened with me...i cannot even connect from my notebook to my pc (for more than a minute)...
same with my mums pc and my girlfliends notebook....
seems like teamviewer is now blocking all connections unless it is a paid account....
I cannot connect to my wife's PC, my friend's PC, or my virtual machine for more than a couple of minutes before I am disconnected. Apparently the system thinks I am using it commercially. I am not. I am connecting only to family and friends, and I do not earn any money from its use. Help!
When using TeamViewer, I saw a prompt for suspected commercial use. Please help to lift the restrictions. Thanks!
I use TeamViwer for personal use between 2 computers at home,
I Have one older computer with Win 7 and a new one with Win 10.
This is for personal use, still TeamViewer doesn't work because it thinks I use it for commercial use.
How can I solve this problem?
Easiest for me is I can get a good and simple answer sent to;
[removed per Community Guidelines]
(Because at the moment I'm so annoyed because I have spent several hours trying to solve this problem and dont want to spend lots of more time to log in here every hour until the problem is solved.)
Since long time I am using the TeamViewer free version for non-commercial use (for personal use only). But recently it is aborting the session too frequently. I never encountered this problem before. Please help me to sort out this problem.
when at home, sometimes like now, i got disconnected from another computer inside my LAN with the reason
Connection timeout, it seems to be used for commercial use
I am definetely using teamviever in my internal LAN, so i am not sure why this is happening.
this is only happening with one pc in my LAN, but not with others outside my LAN.
I filled in the "Please reset me" request 4 days ago with the required info, since TV thought I was using it commercially, but I'm not. I never got an email confirmation and I'm not reset as yet. How long these days (It's Sept 27, 2021) will I have to wait to hear from TV? I also forgot in my request to list all the id's of all the computers (there are 3), but when I tried to put in another request, it said my request was already entered. Thank you.
Previously i had an enetrprise liscence which recently swicthed to a personal when my company went in a different direction with regards to remote access capability. When trying to use it for personal use only i still get a license restriction pop up even thought none of the computers im trying to connect to are on a domain or used in ANY capacity for a business. How can I be able to downgrade and use team-viewer as a consumer.
my login to TeamViewer was suspected as a commercial purpose. when I only use it once
it says your license limits the maximum session duration to a partner, immediate reconnects are blocked. please try later or upgrade your license.
connections to this partner will be blocked until %%:%%
But it was the first time connecting to this partner in a long time, it connected for 1 minute then then it died.
I am on the free licence and just trying to access my other laptop when my girlfriend was on it.
I don't know if this is the right category to post in, but I'm facing a timeout issue when I try to connect with some friends with TeamViewer.
I'm not using TW for commercial use but only private, but since few days I'm kicked out from my session and TW says that I'm using for commercial and not private use.
I'm trying to get in touch with customer support, but it's only for licensed users so I don't know how can I fix this.
Anyone can help?
Same here. I use all my computers at home with teamviewer so that I don't have to get up, relocate the mouse and keyboard on the others since usually it's just to do a couple of short things during the day. I'm on a private license and they blocked me last night. Any fixes on this?
It would be nice if teamviewer would provide us with the supposed "You usage history suggests commercial use" evidence. I have barely used teamviewer since the last time this happened. I would like to know exactly what "usage" is getting me kicked every few months.
This same thing just happened to me as well and i have been with teamviewer for 8 years thus far im waiting for my ticket to be answered as well but we will see what happens
I have been using Teamviewer in my own home for several years now as a private person.
The only time I use it is when I am watching TV in the evening and want to connect to another computer in my study. Thats all I have ever done.
Recently however it wont let make contact because it pops up with a message saying 'this is being used in a commercial environment' and I should contact you.
I am not doing anything different to what I have been doing for the past several years. Can someone 'unlock' whatever switch is causing this to happen please.